Cisco Systems SOHO 77 manual Connecting a Server, PC, or Workstation

Chapter 2 Installation

Installing the Router

Connecting a Server, PC, or Workstation

Before connecting a server, PC, or workstation to the router, see Table 2-2 on page 2-7to determine how to set the router TO HUB/TO PC button.

To connect a server, PC, or workstation to the router, follow the steps in Figure 2-4 on page 2-10.

Figure 2-4 Connecting a Server, PC, or Workstation to the Router

1.Set TO HUB/TO PC button.

Cisco 827, 827-4V

and SOHO 77

TO HUB	ETHERNET	CONSOLE		M	odel Cisco	827-4V
TO PC			ADSL

1		PHONE	+5,+12,-12,-24,-71 VDC
4	3	2	1

2.Connect yellow cable to ETHERNET 4 port

on router.

1.Set TO HUB/TO PC button.

Cisco 827H and

SOHO 77H

TO HUB	ETHERNET 10BASET	Cisco 827
TO PC			H
		CONSOLE
	4		ADSL	+5 VDC
	3
	2	1

2.Connect yellow cable to ETHERNET 4 port

on router.

PC

74116

3.Connect other end of cable to server, PC, or workstation.

To verify the connection, check that the Ethernet 1 LED is on after you complete the router installation.

Cisco 827 and SOHO 77 Routers Hardware Installation Guide

2-10 78-6854-03