Cisco Systems SOHO 77 manual Connect the AC Adapter, 2-14

Chapter 2 Installation

Installing the Router

Connect the AC Adapter

To connect the power supply, follow the steps in Figure 2-8. (Figure 2-8depicts a Cisco 827-4V router, but the process is the same for the Cisco 827, Cisco 827H, SOHO 77, and SOHO 77H routers.)

Warning The device is designed to work with TN power systems.

Warning This product relies on the building’s installation for short-circuit (overcurrent) protection. Ensure that a fuse or circuit breaker no larger than 120 VAC, 15A U.S. (240 VAC, 16A international) is used on the phase conductors (all current-carrying conductors).

Warning This equipment is intended to be grounded. Ensure that the host is connected to earth ground during normal use.

Figure 2-8 Connecting the AC Adapter

1. Press power switch to standby ().

TO HUB	ETHERNET	CONSOLE		Model	Cisco	827-4V
TO PC			ADSL
	1							PHONE	+5,+12,-
									12,-24,-
										71 VDC
						4	3	2
									1

65558

	5. Press power
	switch to on ( ).
	Desktop power
	supply
4. Connect power	2. Connect power
	supply cable.
cord to electrical
	3. Connect power cord
outlet.
	to power supply.

Note Be sure to use the power supply that was shipped with your router. Although you may be able to connect another Cisco power supply to your router, that power supply may not provide all the features that the power supply that shipped with your router does.

Cisco 827 and SOHO 77 Routers Hardware Installation Guide

2-14 78-6854-03