Cisco Systems SOHO 77 manual 2 Problems After Router Is Running

Chapter 3 Troubleshooting

Problems After Router Is Running

Problems After Router Is Running

Table 3-2lists problems that could occur after the router has been up and running.

Table 3-2 Problems After Router Is Running

Symptom	Problem			Solutions
Problems with Ethernet	•	A cable-related		Perform the following steps:
connection. (ETHERNET 1, 2,		problem:		1. Make sure that the connectors at both
3, or 4 LED is off.)
		–	Disconnected	ends of the cable are secure.
			cable.	2. Make sure that the cable is not
		–	Damaged	physically damaged. If it is damaged,
			cable.	order another cable from
				Cisco Systems or replace it with a
				similar cable.
Connection to the ADSL line	•	A cable-related		• Make sure that the connectors at both
is intermittent or lost. (The CD		problem:		ends of the cable are secure.
LED on the front panel is off.)		–	Disconnected	• Make sure that the cable is not
			cable.	physically damaged. If it is damaged,
		–	Damaged	order another cable from
				Cisco Systems or replace it with a
			cable.
				similar cable.
	•	Problem with		• Contact your ADSL line or WAN
		ADSL line or WAN		service provider to determine whether
		service.		there is a problem with the ADSL or
				WAN service.

Cisco 827 and SOHO 77 Routers Hardware Installation Guide

78-6854-03 3-3