Cisco Systems Version 1.1 manual Creating, Modifying, and Deleting Match Patterns, 4-30

Chapter4 CSR GUI Functionalities

Updating Active Datasets

Note Alternatively, you can delete an attribute by clicking Delete when you are in the dialog box for modifying the attribute.

Creating, Modifying, and Deleting Match Patterns

This section describes the steps to create, modify, and delete Match Patterns.

Creating Match Patterns

Step 1 In the Active Dataset tab in the CSR window, click the down arrow in the Selection box, then select Match Patterns from the pull-down menu.

Step 2 Click New. The following New Pattern dialog box appears (Figure4-30 “Dialog Box for New Pattern in Active Dataset”):

Figure4-30 Dialog Box for New Pattern in Active Dataset

The Pattern Key on this screen is the primary key of this pattern in the Match Patterns Table. When a new pattern is being created, “%%%%” is displayed.

Step 3 In the Pattern box, enter the match pattern that a DNIS is to mapped to.

This entry can include 0-9, A-F, *, and period (.).

Step 4 In the Route box, enter the route that applies to this pattern.

Step 5 Click Add to add this pattern, or click Cancel to exit.

Cisco Carrier Sensitive Routing User Guide

4-30