Cisco Systems Version 1.1 manual Modifying Match Patterns, Deleting Match Patterns, 4-31

Chapter4 CSR GUI Functionalities

Updating Active Datasets

Modifying Match Patterns

Step 1 In the Active Dataset tab in the CSR window, click the down arrow in the Selection box, then select Match Patterns from the pull-down menu.

Step 2 In the Match Pattern area, select a pattern by double-clicking on that pattern. Match Pattern information similar to the following appears ( Figure4-31 “ Dialog Box for New Match Pattern in Active Dataset”):

Figure4-31 Dialog Box for New Match Pattern in Active Dataset

Step 3 Change the information accordingly.

Step 4 Click Modify to save the changes, or click Cancel to leave the changes.

Deleting Match Patterns

Step 1 In the Active Dataset tab in the CSR window, click the down arrow in the Selection box, then select Match Patterns from the pull-down menu.

Step 2 In the Match Pattern area, select a pattern. You can select more than one pattern by holding down the Ctrl key while clicking each pattern.

Step 3 Click Delete. A Delete message appears.

Step 4 Click Yes to delete the pattern, or click No to stop the deletion.

Note Alternatively, you can delete a pattern by clicking Delete when you are in the dialog box for modifying the pattern.

Cisco Carrier Sensitive Routing User Guide

4-31