Cisco Systems Version 1.1 manual Creating, Modifying, and Deleting Routes, Creating Routes, 4-32

Chapter4 CSR GUI Functionalities

Updating Active Datasets

Creating, Modifying, and Deleting Routes

This section describes the steps to create, modify, and delete routes.

Creating Routes

Step 1 In the Active Dataset tab in the CSR window, click the down arrow in the Selection box, then select Match Patterns from the pull-down menu.

Step 2 Click New. The New Route dialog box appears ( Figure4-32 “ Dialog Box for New Route in Active Dataset”):

Figure4-32 Dialog Box for New Route in Active Dataset

The key shown on the screen is the primary key of this route in the Route table. When a new route is being created, “%%%%” is displayed.

Step 3 In the Name box, enter the name of the route. The range is 1 to 64 characters. This entry is optional.

Step 4 In the Rule box, click the down arrow, then select from the pull-down menu a rule that applies to the patterns to be used.

Step 5 Click QoS Relationships. The QoS Relationships dialog box appears (Figure4-33 “QoS Relationships Dialog Box in Active Dataset”).

Cisco Carrier Sensitive Routing User Guide

4-32