Cisco Systems Version 1.1 manual Modifying Contact Lists, 4-20

Chapter4 CSR GUI Functionalities

Updating Active Datasets

The key shown on the screen is the primary key of this contact list in the Contact List table. When a new contact list is being created, “%%%%” is displayed.

Step 3 In the Contact List Name box, enter the name of the contact list. The range is 1 to 64 characters.

Step 4 In the Available Contacts box, you can select a contact and click Add to add that contact to the Associated Contacts box.

Step 5 In the Associated Contacts box, you can select a contact and click Remove to remove that contact from the box and return it to the Available Contacts box.

Step 6 Click Add to add this contact list, or click Cancel to exit.

Modifying Contact Lists

Step 1 In the Active Dataset tab in the CSR window, click the down arrow in the Selection box, then select Contact Lists from the pull-down menu.

Step 2 In the Contact Lists area, select a contact list by double-clicking on that contact list. Contact list information similar to the following appears (Figure4-24 “Dialog Box for an Existing Contact List in Active Dataset”):

Figure4-24 Dialog Box for an Existing Contact List in Active Dataset

Step 3 Change the information accordingly.

Cisco Carrier Sensitive Routing User Guide

4-20