Cisco Systems Version 1.1 manual Creating, Modifying, and Deleting Egress Route Attributes

Chapter4 CSR GUI Functionalities

Updating Active Datasets

Step 4 Click Modify to save the changes, or click Cancel to cancel the changes.

Deleting Contact Lists

Step 1 In the Active Dataset tab in the CSR window, click the down arrow in the Selection box, then select Contact Lists from the pull-down menu.

Step 2 In the Contact Lists area, click a contact list. You can select more than one list by holding down the Ctrl key while clicking each contact list.

Step 3 Click Delete. A Delete message appears.

Step 4 Click Yes to delete the contact list, or click No to stop the deletion.

Note Alternatively, you can delete a contact list by clicking Delete when you are in the dialog box for modifying the list.

Creating, Modifying, and Deleting Egress Route Attributes

This section describes the steps to create, modify, and delete Egress Route Attributes.

Creating Egress Route Attributes

Step 1 In the Active Dataset tab in the CSR window, click the down arrow in the Selection box, then select Egress Route Attributes from the pull-down menu.

Step 2 Click New. The following screen appears (Figure4-25 “ Dialog Box for New Egress Route Attribute in Active Dataset”):

Cisco Carrier Sensitive Routing User Guide

4-21