Cisco Systems VIP-FE-TX/4E manual VIP Port Adapter Functions

VIP Port Adapter Functions

Fast Ethernet interface port adapters are numbered from 0 and 1 because VIPs support up to two 100BASE-T ports. The MII and RJ-45 ports on a port adapter each have the same port number because only one of them can be used at one time.

Refer to Table 5, Table 6, Table 7, Table 8, and Table 9 for the FE-TX port numbers associated with the interface processor slots in your chassis. If you install a VIP with two FE-TX port adapters, you can configure both ports; if you install a VIP with one FE-TX port adapter, you need configure only that port.

Note Table 5, Table 6, Table 7, Table 8, and Table 9 indicate FE-TX interface port numbers based on the slots in which they can be installed; they do not represent examples of maximum FE-TX configurations.

Table 5 FE-TX Slot, Port Adapter, and Port Numbers in a Cisco 7000

Slot 0/	Slot 1/	Slot 2/	Slot 3/		Slot 4/
Adapter n/	Adapter n/	Adapter n/	Adapter n/		Adapter n/
Port 0	Port 0	Port 0	Port 0		Port 0
0/0/0	1/0/0	2/0/0	3/0/0	4/0/0
0/1/0	1/1/0	2/1/0	3/1/0	4/1/0
Table 6 FE-TX Slot, Port Adapter, and Port Numbers in a Cisco 7010
Slot 0/	Slot 1/	Slot 2/
Adapter n/	Adapter n/	Adapter n/
Port 0	Port 0	Port 0
0/0/0	1/0/0	2/0/0
0/1/0	1/1/0	2/1/0
Table 7 FE-TX Slot, Port Adapter, and Port Numbers in a Cisco 7505
Slot 0/	Slot 1/	Slot 2/	Slot 3/
Adapter n/	Adapter n/	Adapter n/	Adapter n/
Port 0	Port 0	Port 0	Port 0
0/0/0	1/0/0	2/0/0	3/0/0
0/1/0	1/1/0	2/1/0	3/1/0
Table 8 FE-TX Slot, Port Adapter, and Port Numbers in a Cisco 7507
Slot 0/	Slot 1/	Slot 4/	Slot 5/	Slot 6/
Adapter n/	Adapter n/	Adapter n/	Adapter n/	Adapter n/
Port 0	Port 0	Port 0	Port 0	Port 0
0/0/0	1/0/0	4/0/0	5/0/0	6/0/0
0/1/0	1/1/0	4/1/0	5/1/0	6/1/0

40VIP-FE-TX/4E Installation and Configuration