Verifying the Installation

Caution Using the screws or standoffs to seat the port adapter could warp the port adapter. Before you install and tighten the securing screws, ensure that the port adapter is fully seated by visually verifying that the bottom of the port adapter is in contact with the top of the mounting posts.

Step 6 Install the two standoffs and two Phillips screws to secure the port adapter. (See Figure 12.)

Step 7 Install the CMM into the Catalyst 6500 series switch or Cisco 7600 series router; see the “Installing the CMM” section on page 9 .

Verifying the Installation

Enter the show module mod-numcommand to verify that the system acknowledges the new CMM and has brought it online.

This example shows the output of the show module command with a CMM in slot 4:

Console>

(enable) show module 4

 

 

 

 

Mod

Slot

Ports Module-Type

Model

 

Sub Status

---

----

-----

------------------------- -------------------

---

--------

4

4

5

Communication Media Mod.

WS-SVC-CMM

no

ok

Mod

Module-Name

Serial-Num

 

 

 

 

---

-------------------- -----------

 

 

 

 

4

 

 

sad054206jc

 

 

 

 

Mod

MAC-Address(es)

Hw

Fw

Sw

 

---

-------------------------------------- ------

---------- -----------------

4

00-01-64-46-6a-0e to 00-01-64-46-6a-17 1.0

12.2(2002012.2(20020530:100440

RJ-45 Port Connector and Cabling Specifications

Warning Before opening the unit, disconnect the telephone-network cables to avoid contact with telephone-network voltages. Statement 1041

Warning Do not work on the system or connect or disconnect cables during periods of lightning activity. Statement 1001

Warning Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations. Statement 1036

Warning Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the network interface. Statement 1037

Catalyst 6500 Series Switch and Cisco 7600 Series Router CMM Installation and Verification Note

24

78-14107-07

 

 

Page 24
Image 24
Cisco Systems WS-SVC-CMM manual Verifying the Installation, RJ-45 Port Connector and Cabling Specifications

WS-SVC-CMM specifications

Cisco Systems WS-SVC-CMM, also known as the Cisco Services Control Module, is a high-performance network appliance designed to enhance the capabilities of Cisco routers and integrate a variety of advanced services into existing infrastructures. This revolutionary module caters to enterprises yearning for reliability, scalability, and performance improvements in their network environments.

One of the primary features of the WS-SVC-CMM is its remarkable ability to deliver service integration, enabling organizations to incorporate services such as firewall protection, intrusion prevention, and content filtering directly into their existing Cisco router framework. This integration streamlines operations and reduces the need for multiple devices, leading to lower total cost of ownership.

The WS-SVC-CMM supports a broad array of technologies that empower businesses to optimize their networks. With built-in Cisco Secure Services and Intelligent Network services, organizations can efficiently manage security policies and streamline operations across various network segments. This module supports Virtual Routing and Forwarding (VRF), allowing for flexible traffic management and network segmentation without compromising performance.

Moreover, its architecture is designed for scalability, ensuring that businesses can adapt as their operational needs evolve. The WS-SVC-CMM can accommodate growth seamlessly, handling increased throughput and expanded services without the need for significant hardware upgrades. High availability and redundancy are also key aspects, which means organizations can depend on constant uptime and reliability.

In addition to security and scalability, the WS-SVC-CMM boasts exceptional performance characteristics. With advanced load balancing capabilities and enhanced QoS (Quality of Service) features, this module can prioritize critical applications and manage bandwidth effectively, providing a superior user experience.

User-friendly management capabilities through Cisco's Integrated Management Framework enable network administrators to configure, monitor, and troubleshoot services conveniently. This centralized approach reduces complexity and increases agility, making it easier to respond to changes within the network.

Overall, Cisco Systems WS-SVC-CMM is a robust and versatile solution tailored for businesses looking to enhance their network functionalities. With an emphasis on seamless service integration, high availability, performance scalability, and comprehensive management, this service control module stands out as a strategic investment for enterprises committed to advancing their digital ecosystems.