4
Catalyst 6500 Series Switch and Cisco7600 Series Router CMM Installationand Verification Note
78-14107-07
Front Panel Descriptions
6-Port T1 and E1 Port Adapters
The front panel features of the 6-port T1 and E1 port adapters are as follows:
•Receive port LEDs—The LEDs on the front panel indicate the status of each T1 and E1 interface.
Table3 describes the receive port LED operation.
•RJ-45 connectors—See the “RJ-45 Port Connector and Cabling Specifications”section on page 24
for details.
Figure 2 shows the front panels of the 6-port T1 and E1 port adapters.
Figure 2 6-Port T1 and E1 Port Adapter Front Panel Features
Table2 CMM Rear Module STATUS LED
Color Description
Green Port adapter in slot 4 is up and operational.
Red Port adapter in slot 4 is shut down.
No light Slot 4 port adapter is not located by the system.
Table3 6-Port T1 and E1 Port Adapters Receive Port LEDs
Color Description
Green T1/E1 interface is operational.
Red T1/E1 receive alarm.
Yellow T1/E1 remote alarm.
Off T1/E1 interface has been administratively shut down, or there is no
power.
0
WS-SVC-CMM-6T1
123 4 5
6-Port T1 Interface Port Adapter
RJ-45 connectors
Receive port LEDs
68448
0
WS-SVC-CMM-6E1
123 4 5
6-Port E1 Interface Port Adapter
RJ-45 connectors
Receive port LEDs
68449