Disaster Recovery for CMM Software Upgrades

Step 5 Enter the set poll disable command to disable polling.

Step 6 Enter the set module power up mod command to power up the CMM.

When the CMM powers up, disaster recovery is complete.

Step 7 After you complete the disaster recovery, enter the clear filename-aliasslot0:ws-svc-cmmcommand to terminate the filename translation.

Step 8 Set the power management bits of the CMM to zero (0). This step is necessary to prevent the download mechanism from triggering every time that the CMM is reset.

Step 9 Enter the set poll enable command to enable polling.

Disaster Recovery for Supervisor Engine 720

Note Disaster recovery is supported only on systems that are using Catalyst operating system software on the supervisor engine.

Note This procedure requires CMM software release 12.3(8)XY or later.

Note To successfully perform disaster recovery on the Supervisor Engine 720, you must have the latest ROMMON version on the CMM.

Note Supervisor Engine 720 does not have a slot0:. It has a disk0:.

For systems that use Catalyst operating system software on the supervisor engine, perform these steps:

Step 1 Before performing the disaster recovery, remove all of the port adapters from the CMM. See the “Removing and Replacing Port Adapters” section on page 18 for removal procedures.

Step 2 Enter the copy tftp [device] command to copy the golden image to the supervisor engine Flash memory where [device] is disk0:.

Step 3 Enter the set filename-aliasdisk0:ws-svc-cmm[device]:[golden-image] command to translate the filename of the downloaded file. The [golden-image] is the file to be downloaded, and the [device] can be either bootflash or disk0. For example, the set filename-aliasdisk0:ws-svc-cmmdisk0:wscmm-i6s-mz.123.8.XYcommand sets the file named wscmm-i6s-mz.123.8.XY in disk0: to be downloaded.

Step 4 Enter the set module power down mod pm_option command to power down the CMM. Set the power management bits (pm_option) to 10 if the supervisor engine is in slot 5 or slot 7. Set the power management bits to 11 if the supervisor engine is in slot 6 or slot 8.

Step 5 Enter the set poll disable command to disable polling.

Step 6 Enter the set module power up mod command to power up the CMM.

When the CMM powers up, disaster recovery is complete.

Catalyst 6500 Series Switch and Cisco 7600 Series Router CMM Installation and Verification Note

30

78-14107-07

 

 

Page 30
Image 30
Cisco Systems WS-SVC-CMM manual Disaster Recovery for Supervisor Engine

WS-SVC-CMM specifications

Cisco Systems WS-SVC-CMM, also known as the Cisco Services Control Module, is a high-performance network appliance designed to enhance the capabilities of Cisco routers and integrate a variety of advanced services into existing infrastructures. This revolutionary module caters to enterprises yearning for reliability, scalability, and performance improvements in their network environments.

One of the primary features of the WS-SVC-CMM is its remarkable ability to deliver service integration, enabling organizations to incorporate services such as firewall protection, intrusion prevention, and content filtering directly into their existing Cisco router framework. This integration streamlines operations and reduces the need for multiple devices, leading to lower total cost of ownership.

The WS-SVC-CMM supports a broad array of technologies that empower businesses to optimize their networks. With built-in Cisco Secure Services and Intelligent Network services, organizations can efficiently manage security policies and streamline operations across various network segments. This module supports Virtual Routing and Forwarding (VRF), allowing for flexible traffic management and network segmentation without compromising performance.

Moreover, its architecture is designed for scalability, ensuring that businesses can adapt as their operational needs evolve. The WS-SVC-CMM can accommodate growth seamlessly, handling increased throughput and expanded services without the need for significant hardware upgrades. High availability and redundancy are also key aspects, which means organizations can depend on constant uptime and reliability.

In addition to security and scalability, the WS-SVC-CMM boasts exceptional performance characteristics. With advanced load balancing capabilities and enhanced QoS (Quality of Service) features, this module can prioritize critical applications and manage bandwidth effectively, providing a superior user experience.

User-friendly management capabilities through Cisco's Integrated Management Framework enable network administrators to configure, monitor, and troubleshoot services conveniently. This centralized approach reduces complexity and increases agility, making it easier to respond to changes within the network.

Overall, Cisco Systems WS-SVC-CMM is a robust and versatile solution tailored for businesses looking to enhance their network functionalities. With an emphasis on seamless service integration, high availability, performance scalability, and comprehensive management, this service control module stands out as a strategic investment for enterprises committed to advancing their digital ecosystems.