3.2Explanation of Each Part
1 | Interface Connector | Connected to various hosts via cables. On connection, confirm beforehand that power |
|
| supply of the host and the printer are OFF. The power cable, also, is held in this |
|
| connector. |
|
| Make sure to connect FG terminal with an earth. Do not connect this terminal with the |
|
| lines except for an earth. |
2 | Feed Switch | With this switch pressed, paper is fed. Use this to insert paper and to put space. With |
|
| pushing this switch, power is turned ON, self |
3 | Paper Lamp | Lights up when paper has become scarce or run out. |
|
| (Only when Paper Near End/Paper End function has been set.) |
|
| Put out when paper has been inserted. |
4 | Knob | Use this to set paper or to open the front cover on changing of paper. |
5 | Front Cover | Open/close this on setting or changing of paper. |
6 | Ribbon Cover | Open/close this to change ink ribbon. |
|
| This opens when the left side of the front face is pulled forward. |
7 | Mounting bracket | Use this to fix the main body to a rack, etc. |
8 | Paper Holder | Paper setting section. |
|
| Placing paper from the insertion port, set paper. |
12 | CITIZEN |
