ESC "y" n
[Function] | Setting the print lines after paper near end detection |
[Code] | <1B>H<79>H n |
[Range] | 0 £ n1 £ 255 |
[Outline] | This command sets the number of print lines after paper near end detection. It |
| stops printing after printing n ´ 2 lines since detection of the paper near end, |
| resulting in the paper near end state (See 4.12 Operation Panel and Error |
| Indications). The PE signal (Parallel interface only) changes when the paper |
| near end is detected. |
[Default] | n = 0 |
ESC DC2 n1 n2
[Function] | Deleting the download character, message, bit image | |||
[Code] | <1B>H <12>H n1 n2 | |||
[Range] | 0 | £ n1£ 3 |
|
|
| 0 | £ n2 | (Specify 0 at n1 = 0) | |
|
|
| (1 £ n2 £ 10 at n1 = 1) | |
|
|
| (32 £ n2 £ 224 at n1 = 2) | |
|
|
| (Specify 0 at n1 = 3) | |
[Outline] | This command deletes the downloaded characters, message, and bit image. | |||
|
|
|
| |
|
| n 1 | Object Deleted |
|
0All(Message, characters, bit image)
1Download message
2Download characters
3Download bit image
With n2, specify which data of the function specified with n1 should be deleted.
n2 = 0 Deletes all the download function specified with n1.
n2¹0 Deletes the data downloaded at the value specified with n2 (Value specified when saving with each download command), of the download function specified with n1.
Note) No meaning when n1 = 0 is set.
102 | CITIZEN |
