Citizen Systems iDP-3421, iDP-3420, iDP-3423 user manual ESC p m n1 n2

iDP-3420/3421/3423 User’s Manual

ESC "p" m n1 n2

[Function]	Specifying the pulse generation
[Code]	<1B>H <70>H m n1 n2
[Range]	0 £ m £ 1
	0 £ n1 £ n2 £ 255
[Outline]	This command outputs the signals specified with n1 and n2 to the connector pins.
		m	Connector Pin
		0	Drawer kick connector No. 2 pin
		1	Drawer kick connector No. 5 pin
	The ON time is n1´2 mS and the OFF time is n2´2 mS.
[Caution]	The user should consider driving the drawer at the following duty ratio.
		ON time ¸ (ON time + OFF time) £ 0.2
		(It is recommended to make n2 four times higher or more than n1.)

The drawer kick-out solenoid should have a resistance value of 36W or more. Do not use a lower one because an overcurrent will flow. For the drawer power, be sure to use the printer power (Drawer kick-out connector No. 4 pin).

118 CITIZEN