ESC "*" n1 n2
[Function] | Specifying the bit image mode | ||
[Code] | <1B>H <2A>H n1 n2 | ||
[Range] | 1 £ n1 + 256 ´ n2 £ 378 | ||
[Outline] | This command allows printing in the bit image mode. Divide the number of dots | ||
| printed by 256 and assume its quotient to be n2 and remainder to be n1. | ||
| Therefore, the number of horizontal dots will be n1 + 256 ´ n2. | ||
| If the bit image data is entered beyond the dot positions printable in one line, the | ||
| surplus data will be discarded. Normal data processing is restored after bit | ||
| image printing. Printing is done in a single direction. | ||
|
|
|
|
|
|
|
|
ESC "-" n
[Function] | Specifying/Canceling the underline |
[Code] | <1B>H <2D>H n |
[Outline] | This command selects/deselects an underline. The underline is selected at n = 1 |
| and deselected at n = 0. |
[Default] | n = 0 |
61 | CITIZEN |
