ESC DC3 n
[Function] | Printing the message |
[Code] | <1B>H <13>H n |
[Range] | 1 £ n £ 10 |
[Function] | This command prints a message. If the value of n is specified beyond the range, |
| the message will not be printed. |
ESC "y" n |
|
[Function] | Setting the print lines after paper near end detection |
[Code] | <1B>H<79>H n |
[Range] | 0 £ n1 £ 255 |
[Outline] | This command sets the number of print lines after paper near end detection. It |
| stops printing after printing n ´ 2 lines since detection of the paper near end, |
| resulting in the paper near end state (See 4.12 Operation Panel and Error |
| Indications). The PE signal (Serial/Parallel) changes when the paper near end |
| is detected. |
[Default] | n = 0 |
70 | CITIZEN |
