Citizen Systems iDP-3423, iDP-3420, iDP-3421 user manual Connecting the Drawer Kick-Out Connector

iDP-3420/3421/3423 User’s Manual

4.4Connecting the Drawer Kick-Out Connector

1.Turn off the power.

2.Check the top and bottom of the drawer kick-out cable connector and connect it to the drawer kick-out connector located on the back of the printer.

3.Screw the grounding cable of the drawer to the grounding terminal of the printer.

CAUTION:·Connect only the prescribed drawer (Solenoid) to the drawer kick-out connector.

Drawer Kick-Out Connector

Drawer Kick-Out Cable Connector

Earth Terminal

4.5Opening/Closing the Auto Cutter (iDP-3421/3423)

The auto cutter is secured by a magnet. Hold the auto cutter and turn it in the arrow- indicated direction to open/close it.

CAUTION:·When closing the auto cutter, do so gently not to give a shock.

Auto Cutter

26 CITIZEN