LF
[Function] | Printing and paper feed |
[Code] | <0A>H |
[Outline] | If the print buffer contains the data, this command will feed the line after |
| printing. If not, the command only feeds the line. |
CR |
|
[Function] | Printing |
[Code] | <0D>H |
[Outline] | This command prints the data. If the DIP switch segments 1 to 6 are set to OFF, |
| the printer will print the data in the print buffer and feed the paper by one line. |
| If they are set to ON, the printer will print the data in the print buffer and will |
| not feed the paper. |
ESC "z" |
|
[Function] | Setting the |
[Code] | <1B>H <7A>H |
[Outline] | This command sets the line feed width to 1/6 inch (Default). |
80 | CITIZEN |
