ESC > n
[Function] | Saving current setting |
|
[Code] | <1B>H<3E>H<n> |
|
[Range] | n = 0 or 1 |
|
[Outline] | This command saves International character, Serial port baud rate, Print density, Auto | |
| power off time and maximum speed at Infrared communication to NV memory so | |
| that the setting can be resumed automatically when power on after setting data on | |
| RAM memory is gone by like battery is disconnected. | |
|
|
|
| n (Hex) | Type |
0Max speed at Infrared communication is 115200 bps.
1 Max speed at Infrared communication is 57600 bps.
[Caution] | Do NOT use this command frequently. |
| NEVER turn the printer off during command is running. Otherwise there is a risk to |
| lose the firmware updating function. |
| Power is turned off automatically when setting is saved. |
[Default] | n = 0 |
[See Also] | ESC R, ESC S, ESC Y, ESC x |
