Citizen Systems Model CMP-10 manual ESC \ n1 n2, Function

ESC \ n1 n2

[Function]	Specifying the relative positions
[Code]	<1B>H<5C>H<n1><n2>
[Range]	{0 =< n1 =< 255}
	{0 =< n2 =< 255}
[Outline]	The printing start position is specified in the number of dots (1/203 inch unit) from
	the current position.
	¥ Rightward direction is taken as plus and leftward direction as minus.
	¥ To specify N dot in minus (left) direction, use a complement of N for assignment.
	¥ N dots = 65536 Ð N
	¥ The number of dots is divided by 256, whose quotient is taken as n2 and the residual
	as n1.
[Caution]	Specifying exceeding the top of line or the end of line is ignored.
[See Also]	ESC $
[Sample Program]	See Sample Program and Print Results for ESC $.

ESC _

[Function]	Setting the printer in default state
[Code]	<1B>H<5F>H
[Outline]	Sets the printer in default state. The default state is as follows:
	¥	All printing attributes like underline, rotating etc. are cleared.
	¥	Internal font A (12 ⋅ 24) is selected.
	¥	Pitch between lines is 1/6 inch.
	¥	Pitch between characters is 0.
	¥	Barcode height is 162 dots, and barcode width is 3.
	¥	All downloaded fonts and bit images are cleared.
	¥	Print density is 100%.
	¥	Communication speed is set to 9600 bps.
	¥	Auto power-off time is set at 5 min.
	¥	Memory switch is set to Òall 0Ó.
[See Also]	ESC @

Ñ 34 Ñ