GS ) n m
[Function] | Setting of printer flags |
|
|
[Code] | <1D>H<29>H<n><m> |
|
|
[Range] | {0 =< n =< 8(Hex)} |
|
|
| {m = 0 or 1(Hex)} |
|
|
[Outline] | This model has 8 memory switches and selecting, releasing, and changing a function | ||
| is available with this command. |
| |
| Memory switch setting is retained even after printer power off. | ||
| n specifies the number of memory switch to be operated. | ||
| m specifies a selection. |
|
|
| The contents of individual memory switches are as shown below. | ||
|
|
|
|
| Memory Switch | OFF (0) | ON (1) |
| 1 | Slach 0 | Normal 0 |
| 2 | CR is ignored | CR has the same action as LF |
|
|
|
|
| 3 | Default font A | Default font B |
|
|
|
|
| 4 | Prints ÒLow BatteryÓ. | Does not print ÒLow BatteryÓ. |
| 5 | ASB Invalid for default | ASB Valid for default |
| 6 | Not in use |
|
|
|
|
|
| 7 | IrDA protocol enabled | IrDA protocol disabled |
| 8 | Shift JIS for default | JIS for default |
[Caution] | The setting of the changed memory switch is enabled by resetting the power switch. | ||
No. 8 is only for Japanese model.
Ñ 42 Ñ
