Citizen Systems Model CMP-10 manual ESC D n k NUL, See Also Sample Program Print Results

ESC D [ n ] k NUL

[Function]	Setting Horizontal Tab Position
[Code]	<1B>H<44>H [ <n> ] k<00>H
[Range]	{0 =< n =< FF(Hex)}
	{0 =< k =< 20(Hex)}
[Outline]	Specifying a horizontal tab position.
	¥ ÒnÓ indicates the no. of columns from the beginning to the horizontal tab position.
	At this time, n= set position Ð 1 is to be specified. For example, to set the position
	at 9th column, n=8 is to be specified.
	¥ k denotes the number of horizontal tab positions you want to set.
	¥ The tab position is set at position where it is Òcharacter width ⋅ nÓ from the line
	beginning. The character width, at this time, includes the rightward space amount.
	In double wide characters, it is made double of the ordinary case.
	¥ Tab positions can be specified are maximum 32. Specifying exceeding this is
	ignored. <n> k, which denotes a setting position, is input in the increasing order
	and ends at <00> H.
	¥ ESC D NUL clears all the set tab positions. Following clearing, horizontal tab
	command is ignored.
[Caution]	When the data, <n> k, is equal to or smaller than its preceding data, <n> k-1, it is
	assumed that tab setting is finished. If this is the case, the next data onward will be
	processed as normal data. When the data, <n> k, exceeds a 1-line print area, set the
	horizontal tab position, assuming ÒSet digit position = Maximum print digits + 1.Ó
	The horizontal tab position does not change even if the character width is altered
	after setting the horizontal tab position.
[Default]	Initial value is specified every eight characters (9th, 17th, 25th, and on) of Font A.
[See Also]	HT
[Sample Program]
[Print Results]	See Sample Program and Print Results for HT.

Ñ 24 Ñ