Citizen Systems Model CMP-10 manual ESC * m n1 n2 d k, Max. Dots

ESC * m n1 n2 [d] k

[Function]	Specifying the Bit Image Mode
[Code]	<1B>H<2A>H<m><n1><n2> [d] k
[Range]	{m= 0, 1, 20, 21(Hex)}
	{0 =< n1 =< FF(Hex)}
	{0 =< n2 =< 1(Hex)}
	{0 =< d =< FF(Hex)}
	{k = n1 + FF(Hex) x n2} (m=0, 1(Hex)) Number of bytes containing image data
	{k = (n1 + FF(Hex) x n2) x 3} (m=20, 21(Hex)) Number of bytes containing image data
[Outline]	According to the number of dots specified in n1, n2, specify the bit image of mode m.
	¥ The No. of dots printed is divided by 256, whose quotient is taken as n2 and residual
		as n1.
	¥ Bit image data is sent starting from the top to bootom and from the left to right
		(vertical columns scanning). In modes m=0, and 1 only one byteper column is sent
		and in mode m-20h, 21h 3 bytes for each column are sent.
	¥ d is bit image data, the bits subject to printing are taken as Ò1Ó and those not as
	Ò0Ó.
	¥ The bit image modes specified by m are shown as follows:
		m (Hex)	Mode	Vertical Direction			Horizontal Direction
				Dots	Dot Density	Dot Density		Max. Dots
		0	8-dot single density	8	67 DPI		101 DPI	192
		1	8-dot double density	8	67 DPI		203 DPI	384
		20	24-dot single density	24	203 DPI		101 DPI	192
		21	24-dot double density	24	203 DPI		203 DPI	384
[Caution]	¥ When the values set in m (bit image mode) are out of the above range, the data
		following after n1 is processed as normal printing data.

¥After completion of bit image printing, printer returns to normal data processing mode.

¥Line space is automatically set to 0.

Ñ 14 Ñ