Esc Z, Byte | Citizen Systems Model CMP-10 specs

ESC Z

[Function]

Returning diagnostic information

[Code]

<1B>H<5A>H

[Outline]

The printer will return 32 bytes of information with the following structure:

1-22: Printer name up to 22 charachters.

23-25: Firmware version

26-27: Language version, described by two characters.

28-32: When the corresponding bit is 1, the function is supported and when 0, the

function is not supported.

BYTE 28

BIT7

BIT6

BIT5

BIT4

BIT3

BIT2

BIT1

BIT0

IrDA support

Mag stripe reader

Reserved

Katakana support (Characters after 80(Hex))

JIS and SHIFT-JIS Support

Not in use

Not in use

Reserved, always 1

Ñ 31 Ñ

Image 33

Citizen Systems Model CMP-10 manual Esc Z, Byte

Contents

Command Reference Revision Code Command Function CMP-10 Command SET GS H GS LGS W Xxxx ALL Command Details BEL Print Results Sample Program 0AH ESC RS ESC SP n Default Sample Program Default See Also ESC ! nBit Function Value END ESC $ n1 n2 ESC % n ESC & m n1 n2 d k Initialize command Hex Mode Vertical Direction Horizontal Direction Dots ESC * m n1 n2 d kMax. Dots IMG1 Page ESC + ESC nHex Type ESC ESC 3 n Bit Equipment Value ESC = n 21 Ñ Hex Track ESC ? n ESC @ See Also Sample Program Print Results ESC D n k NUL ESC E n ESC G n ESC J n ESC R nHex Character Set ESC T ESC S nHex Speed bps Model CMP-10 Ver Hex Condition ESC V n ESC Y n Byte ESC Z Update via firmware interface Not in use Reserved, always 33 Ñ ESC \ n1 n2 ESC ` Hex Position ESC a n ESC c5 n ESC d n ESC ESC x n B B B GS n m Memory Switch OFF See Also Sample Program GS * n1 n2 d n1 n2 D1 ...... Dn Hex Name Dot Density Vertical Direction Horizontal Direction GS / m 1DH3AH Hex Printing Position GS H n GS L nL nH GS W n NL = 40 Hex, nH = 2 Hex GS n1 n2 n3 Hex Mode Bit Status Item Addressed by ABS GS a n Not in use Thermal head is overheated Disabled for ASB may also have changed Hex Font GS f n 1DH68Hn GS k m d1 ..... dk NUL GS k m n d1 ...... dn Bar code system Range of k Range of dBar code system Range of n Range of d For Standard Mode ForDescription of Bar Codes JAN-8EAN Code set a Code set B Code set C Hex Descriptionof Bar Codes Type Print Sample Outline of Symbol Max. ColumnJAN-8 CODE93 CODE128 GS w nL nH AT command Function Factory default AT*PAIRINFO=0AT*PAIRINFO=1 Example Bluetooth Init Commands ESC l n Black Mark Function Distance from PE sensor and print head is approx .5 mm Character Codes Table Setup menu function After Ver2.20 Change IrDA MAX Speed ? If YES is not chosen, the changed setting will not be lost Memory switch 8 = Memory switches OFF0 ON1 Change Print Density ? Programming Considerations Serial Interface Pin No Signal Direction Function Pin No. of Cable 14, 15 pin Communicate mode setting Explanation of Input/Output Signals RS-232C Circuit Electrical Characteristics IrComm 3 Wire raw IrLPT Infrared Communication Specifications Mcbf Mechanical Specification Battery Power Related Specifications AC Adaptor EMI StandardUL, C-UL, PSE 10AD-JU