162 Citrix NetScaler Policy Configuration and Reference Guide

The following screen shot is an example of an “_ANY” operator..

6.To use an existing pattern set, select it from the Pattern Set Name drop- down menu.

7.To create a new pattern set, click the icon for creating a new pattern set, and configure the pattern set as follows:

In the Name field, enter a name, and then click Add.

In the Add Pattern dialog box, enter a pattern in the Pattern field.

If you want to manually assign an index to this pattern set, in the Index field, enter an integer. Note that if you manually add an index to an entry, you must do this for all entries in the set. Otherwise, the NetScaler automatically assigns an index to each entry in the set.

Click Create.

8.Repeat the previous step until you have added all of the patterns that you want.

9.Click Create.

Note: To view the new pattern set, click the icon for modifying a pattern set.

To create and use a CONTAINS_ANY pattern set using the NetScaler command line

1.At a NetScaler command prompt, type:

add policy patset patternName

Where pattern_name is the name of a pattern that you want to configure.

Page 176
Image 176
Citrix Systems 9.2 manual At a NetScaler command prompt, type