10.Auxiliary Function 2 - Momentary / Latched / Timed Operation. (resets with arm and disarm) Selects between Momentary, Latched, or Timed output for Aux. 2.
When Momentary operation is selected, the system will provide an output for as long as the Transmitter button is held.
When Latched operation is selected, the system will provide an output that turns on when the transmitter button is pressed and turns off when the transmitter button is pressed again.
When Timed operation is selected, the system will provide an output that turns on for 30 seconds each time the transmitter button is pressed. If the button is pressed again during the 30 seconds, the output will turn off.
When the Latched or Timed outputs are activated:
•Arming the system will turn off the Aux. 2 output if it was turned on while the system was disarmed.
•Disarming the system will turn off the Aux. 2 output if it was turned on while the system was armed.
11.Auxiliary Function 3 - Momentary / Latched / Timed Operation. Selects between Momentary, Latched, or Timed output for Aux. 3.
When Momentary operation is selected, the system will provide an output for as long as the Transmitter button is held.
When Latched operation is selected, the system will provide an output that turns on when the transmitter button is pressed and turns off when the transmitter button is pressed again.
When Timed operation is selected, the system will provide an output that turns on for 30 seconds each time the transmitter button is pressed. If the button is pressed again during the 30 seconds, the output will turn off.
The operation of Aux. 3 is not affected by arming and disarming.
Page 20 - MS8200 / MS8300 Installation Manual