Logic Sensor II

Because of its advanced design, the Logic Sensor II can be set for Shock and Motion detection or Shock detection only, simply by the way the sensor is mounted. See Mounting

Components.Adjustment

The shock and motion sensitivity of the Logic Sensor II are set independently, using the Remote Transmitter. For shock, there are 12 levels of sensitivity. For motion, there are 8 levels of sensitivity. Level 1 is off for both shock and motion.

•If the motion sensitivity is set to Level 1, the Logic Sensor II will not detect motion, only shock.

•If the shock sensitivity is set to Level 1, the Logic Sensor II will not detect shock, only motion.

•If both shock and motion are set to Level 1, the Logic Sensor II will be completely off.

When both shock and motion sensitivity are set to Level 1, the siren will emit 1 chirp, followed by 3 chirps each time the system is Armed to indicate that the Logic Sensor II is off.

 

 

 

 

 

Logic Sensor II Sensitivity

 

 

 

 

 

 

 

 

Shock Level

1

2

 

 

 

 

12

 

 

 

off

lowest

 

 

highest

 

 

 

 

 

 

 

 

 

 

 

Motion Level

1

2

 

 

 

8

 

 

 

 

 

off

lowest

 

highest

 

 

 

 

 

 

 

 

 

 

To Adjust the sensitivity:

1.Turn the ignition key on.

2.Within 4 seconds, press Transmitter Button 1.

•The siren will chirp (1 through 12) to indicate the current shock sensitivity level. The default shock sensitivity setting is 6.

3.Test the sensitivity. The siren will respond with a short chirp when shock is detected and a long chirp when motion is detected.

•The Logic Sensor II has 8 levels of sensitivity for motion. The default motion sensitivity setting is 4.

Be sure that the Logic Sensor II is mounted horizontally if motion detection is desired.

4. To make adjustments:

Press Button 1 to increase the shock sensitivity.

Press Button 2 to decrease the shock sensitivity.

Press the Mode Button, then Button 1 to increase the motion sensitivity.

Press the Mode Button, then Button 2 to decrease the motion sensitivity.

•The siren will chirp to indicate the sensitivity level each time the Button is pressed.

5.When you are satisfied with the sensitivity, turn off the ignition.

Warn Away Sensitivity

MS8200 / MS8300 Installation Manual - Page 21