Mount the extended range antenna to the front windshield behind the rear view mirror for best operation. Be sure that this area is clean and free of any metallic window tint film. In certain vehicles such as those equipped with a heated windshield or a
Behind rear view mirror
Logic Sensor IIThe Logic Sensor II, included with the system, is designed to be mounted in the interior of the vehicle using a tie wrap or double sided tape. Be sure to avoid mounting the sensor to sources of strong electrical interference such as cellular phone transceivers or the vehicle’s engine computer.
Suggested mounting locations are an air conditioning duct, or a dashboard or center console support brace.
Shock and MotionWhen mounted horizontally, the Logic Sensor II will detect both shock and motion. The Logic Sensor II’s motion detection is most effective on the axis on which it is mounted, which means that careful selection of the mounting location of the sensor will help to insure it’s effectiveness.
Shock OnlyWhen mounted vertically, the Logic Sensor will detect shock or impacts to the vehicle only and will be unaffected by slow rocking movements of the vehicle. This is especially useful in vehicles that are normally parked in areas subject to high wind or parked in tall parking structures that tend to move or sway.
Page 4 - MS8200 / MS8300 Installation Manual