Basic Operations

English

s’Owner manual

•If a title has been input, it is shown in the SUB display. If no title has been input, “---------” appears in the display. To input a title, refer to the subsection “Entering titles” in “Other Functions” section.

•For CD and TV, some special characters of the title, the PS name of the RDS, and the DAB service label will not be displayed on the Information Panel of the DCP. In this case, those characters will only be left blank.

•When CT data is not received, “CT--:--” appears in the display.

Showing a mode display

When the panel is open:

Press the TITLE button ( to show the Title List display. In the Title List display, the titles of items stored in the PRESET buttons # 1 to 6 are listed.

∗In the RDS tuner mode, a PS name is displayed.

∗In the DAB mode, a service label is displayed.

∗For detailed information, refer to the section “Title list play”.

When adjusting the angle of the display be careful no to let your fingers get caught by the panel or instrument panel of the vehicle.

3.To store the Color LCD display ¥ in the source unit, turn it to the horizontal position until a click is heard.

Turning on and off the monitor

Pressing the DISP button @ turns the monitor on and off.

∗When a button is pressed or during security monitoring, the monitor-off mode is canceled.

Opening and turning the display

Notes:

•Do not place any object on the open display.

•Do not drop any object on the movable part.

•Do not expose the display to shocks.

1.Press the OPEN button ! to open the Color LCD display ¥.

∗If the Color LCD display ¥ is left horizontally in the open position for 10 seconds or longer, it is automatically drawn in.

2.Turn the Color LCD display ¥ upwards to a good view angle.

When the monitor is turned upwards, a picture appears in the display. The Information Panel 4 display disappears.

CAUTION

Do not turn the display unless it is completely open.

Mute

Each time you press the MUTE button $, mute is turned on and off.

“MUTE” appears when mute is turned on.

Setting the Z-enhancer

This unit comes with 3 types of sound tone effect stored in memory. Select the one you prefer.

∗The factory default setting is “Z-EHCR OFF”. When a Z-enhancer comes on (1-3),“Z-EHCR” appears in the display.

•“Z-EHCR 1” (Z-Enhancer 1):

Setting emphasizing bass.

•“Z-EHCR 2” (Z-Enhancer 2):

Setting emphasizing treble.

•“Z-EHCR 3” (Z-Enhancer 3):

Setting emphasizing bass and treble.

•“Z-EHCR OFF” (Z-Enhancer off):

Neither bass nor treble are emphasized by the Z-enhancer.

16 VRX653R