RDS Operations

Switching the PTY display language

Note:

•This function is enabled only when the panel is open.

You can select one of 4 languages (English, German, Swedish or French) for the PTY displayed in the display.

∗The factory default setting is “GB” (English). 1. Press the ADJ button * to show the

adjustment selection display.

2.Operate the JOYSTICK ¡ upward or downward to select "PTY LANG". After that, select a desired language by operating the JOYSTICK ¡ rightward or leftward and then press the ENT at the center of the JOYSTICK ¡ to change the setting.

“GB”: English

“F”: French

“D”: German

“S”: Swedish

3.Press the ADJ button *. The unit returns to the previous mode.

Volume setting of TA, emergency broadcast (ALARM) and PTY

The volume for TA, ALARM and PTY interrupts can be set during TA, ALARM or PTY interrupt.

∗The factory default setting is “15”.

During a TA, ALARM or PTY interrupt, operate the VOLUME button 2 upward or downward to set the volume to the desired level (00 to 33).

∗When the TA, ALARM or PTY interrupt ends, the volume returns to the level it had before the interrupt.

CD Changer Operations

CD changer functions

When an optional CD changer is connected through the CeNET cable, this unit controls all CD changer functions. This unit can control a total of 2 changers (DVD and CD).

Press the FNC button 1 and select the CD changer mode to start play. If 2 CD changers are connected, press the FNC button 1 to select the CD changer for play.

∗If “NO MAG” appears in the display, insert the magazine into the CD changer. “LOADING” appears in the display while the player loads (checks) the magazine.

∗If “NO DISC” appears in the display, eject the magazine and insert discs into each slot. Then, reinsert the magazine back into the CD changer.

CAUTION

CD-ROM discs cannot be played in the CD changer.

Pausing play

1.Press the PLAY/PAUSE button 3 to pause play. “PAUSE” appears in the display.

2.To resume play, press the PLAY/PAUSE button 3 again.

Displaying CD titles

This unit can display title data for CD-text CDs and user titles input with this unit.

Each time you press and hold the DISP button

@for 1 second or longer, the title display changes in the following order.

When the panel is closed:

User title (disc) ➜ CD-text title (disc) ➜ CD-

text title (track) ➜ User title (disc)...

When the panel is open:

User title (disc) ➜ CD-text title (disc & track) ➜

User title (disc)...

Note:

•If the CD playing is not a CD-text CD or no user title has been input, “----------” appears in the display.

●Scrolling a CD-text title

When a CD-text title is longer than 16 characters (8 characters when the panel is closed), you can scroll the display as follows.

English

s’Owner manual

VRX653R 23