NAVI Operations
NAVI functions
When Clarion Navigation (hereinafter referred to as NAVI) is connected, the following functions are enabled:
•Showing the NAVI display;
•NAVI guidance sound interruption;
•Remote operation of navigation functions by the remote controller through the optic
sensor.
∗While interrupting the NAVI audio signal, an audio sound level is decreased and the NAVI guidance sound output is mixed.
∗NAVI guidance sound interruption is possible even when the panel is closed, however in this case, only the Audio Display is showed.
NAVI operation
Changeover between NAVI display and Audio/ Visual (hereinafter referred to as AV) displays. When the panel is open, the NVG/AV button ) has the same function as the NVG/AV button
)on the NAVI remote controller to set a screen mode and a NAVI interruption.
Operate this button to change over between NAVI and AV displays.
∗When the NAVI Display/NAVI guidance sound interruption setting (NAVI operation) is turned to the NAVI/NAVI mode on this unit, the audio sound level is decreased.
English
s’Owner manual
Setting Clarion NAVI as external input equipment
Be sure to perform this setting after connecting Clarion NAVI.
∗The factory default setting is “NAVI”.
1.When the panel is open, press the ADJ button * to show the adjustment selection display.
2.Operate the JOYSTICK ¡ upward or downward to select “INPUT”. A menu bar is shown to the right to select the following items:
●“NAVI”: Setting when Clarion NAVI (NAX9500E, NAX943DV) is connected;
●“CCD”: Setting when Clarion CCD camera is connected to this unit;
●“RGB”: Setting when a RGB image of other company’s equipment is input;
●“COM”: Setting when a composite image of other company’s equipment is input.
∗These settings cannot be selected when the DVD changer is connected.
3.Operate the JOYSTICK ¡ rightward or leftward to select “NAVI”. Press ENT at the center of the JOYSTICK ¡ to set connection of Clarion NAVI.
VRX653R 37