TV Operations

Setting the TV area

∗This function is enabled only when the panel is open.

When you select the TV area (TV reception area), the TV tuner area setting changes.

1.Press the ADJ button * to switch to the adjustment selection display.

2.Operate the JOYSTICK ¡ upward or downward to move the cursor to “TV AREA” and press the ENT at the center of the JOYSTICK ¡ to display a list of country name.

3.Operate the JOYSTICK ¡ upward or downward to select a desired country. Then press the ENT at the center of the JOYSTICK ¡ to set it.

4.When the setting is finished, operate the JOYSTICK ¡ rightward or leftward to move the cursor “MENU”. Then press the ENT at the center of the JOYSTICK ¡ to return to the adjustment selection display.

Setting the TV diver

∗This function is enabled only when the panel is open.

∗Normally use the TV diver with the “ON” position.

You can change the reception setting for the TV antenna connected to the TV tuner.

1.Press the ADJ button * to switch to the adjustment selection display.

2.Operate the JOYSTICK ¡ upward or downward to select “TV DIVER”.

3.Operate the JOYSTICK ¡ rightward or leftward to select “ON” or “OFF” and press the ENT at the center of the JOYSTICK ¡ to set the selected reception setting.

● ON:

Sets reception emphasizing the visual.

●OFF:

Sets the diver setting to OFF.

4.Press the ADJ button * to return to the previous mode.

Adjusting the brightness and tone of color

Notes:

•This operation is available only when the car is stopped and the parking brake is applied.

•This function is not available when the display is stored.

•The HUE setting can be adjusted only when the NTSC mode is selected.

1.Press the BND button % to switch to the adjustment selection display.

2.Operate the JOYSTICK ¡ upward or downward to select the option “MONI ADJ” (by moving the cursor).

3.Press the ENT at the center of the JOYSTICK ¡.

4.Operate the JOYSTICK ¡ rightward or leftward to select “BRIGHT”,“COLOR” or “HUE” (by moving the cursor).

●“BRIGHT“:

Adjust the brightness of the display.

●“COLOR“:

Adjusts the color saturation.

●“HUE“:

Adjusts the tone of color (red is emphasized or green is emphasized.)

5.Operate the JOYSTICK ¡ upward or downward to adjust a level.

6.When the adjustment is made, operate the JOYSTICK ¡ rightward or leftward to move the cursor to “MENU”. Then press the ENT at the center of the JOYSTICK ¡ to return to the adjustment selection display.

English

s’Owner manual

VRX653R 31