Digital Radio/DAB Operations
English
3.When “PTY ITEM” is selected, PTY selection is carried out. Operate the JOYSTICK ¡ upward or downward to select a desired PTY. Press the ENT at the center of the JOYSTICK ¡ to set the selected PTY ITEM.
(The PTY ITEM thus set is listed at the lower right of the display.)
Dynamic Label Function
A dynamic label (hereinafter referred to as
“DLS”) is a text data associated with each DAB service. This set can display DLS up to 128 characters in a display.
∗This function is enabled only when the panel is open.
manual s’Owner
4.When “PRESET” is selected, PTY preset memory can be called for and stored.
5.Operate the JOYSTICK ¡ upward or downward to select Preset Nos.1 to 6.
6.Press the ENT at the center of the JOYSTICK ¡ to call for the preset PTY ITEM.
Press the ENT at the center of the JOYSTICK ¡ for 2 seconds to store the PTY ITEM currently selected to any Preset No. selected (listed at the lower right).
7.After adjustment is finished, operate the JOYSTICK ¡ rightward or leftward to move the cursor to “MENU”, and press the ENT at the center of the JOYSTICK ¡ to return to STANDARD display.
Emergency broadcast
If an emergency broadcast is received, all the function mode operations are stopped. “ALARM” appears in the display and the emergency broadcast can be heard.
∗RDS interrupt does not function during AM radio reception or in TV mode.
●Cancelling an emergency broadcast
If you press the AF Button 7, emergency broadcast reception is cancelled.
Volume setting of TA, emergency broadcast (ALARM), information and PTY
The volume for TA, ALARM, information and PTY interrupts can be set during TA, ALARM or PTY interrupts.
∗The factory default setting is “15”.
During a TA, ALARM or PTY interrupt, operate the VOLUME button 2 upward or downward to set the volume to the desired level (00 to 33).
∗When the TA, ALARM, information or PTY interrupt ends, the volume returns to the level it had before the interrupt.
DLS display mode
Press the TITLE button ( for 1 second or longer to place in the DLS display mode. To cancel the DLS mode and return to the previous display, press the TITLE button ( again. If there is a DLS data in the reception service, DLS text is displayed in the text displaying area.
A mark “Δ appears at the head of a whole text sentence (page), and a RETURN mark is indicated at the end point.
DLS memory
Up to six DLS, currently being received, can be stored. By pressing the PRESET button # 1 to 6 for 2 seconds or longer, the DLS page currently being displayed is stored. Operating the JOYSTICK ¡ rightward or leftward moves a cursor to either P1 through P6, and pressing the ENT at the center of the JOYSTICK ¡ for 2 seconds stores it.
DLS Calling
To call the DLS stored in the DLS memory, press the PRESET button #. The DLS in the DLS memory is displayed by 16 characters (2 lines) at the intervals of 5 seconds (automatic calling). To display at shorter intervals, press the PRESET button # while waiting for successive DLS character string to be displayed, the following DLS character string is displayed (manual calling).
With the DLS memory being called, move the cursor to “UPDATE” and press the ENT at the center of the JOYSTICK ¡. The display is changed into the DLS display being received.
36 VRX653R