English

s’Owner manual

TV Operations

Changing over TV display size

∗This function is available only when the panel is open.

1.Press the DISP button @ for 1 second or longer to display playback information such as screen size.

2.Each time you press the DISP button @ for 1 second or longer to change over the TV display size, the TV display size changes in the following order:

“NORMAL” ➜ “WIDE” ➜ “F. WIDE” ➜ “CINEMA” ➜ “NORMAL”

●“NORMAL”: (normal display)

There is a black area at both right and left ends of a display. In case of normal TV broadcasting (4:3), the image can be shown without being cut or deformed.

●“WIDE”: (wide mode)

NTSC: The image at right and left ends in a display elongates horizontally.

PAL: The image may be slightly cut off at the top and bottom of the screen.

●“F. WIDE”: (full wide mode)

The whole image elongates horizontally.

●“CINEMA”: (cinema mode)

The image at both top and bottom in a display disappears.

Notes:

•When a normal 4:3 size image, not being a wide one, is viewed by displaying it fully on a wide TV display in a wide mode or a full-wide mode, a part of the peripheral image will be lacking or deformed. In deference to the intention of producer, an original image can be viewed in a normal mode.

•During superimposed display, it becomes a full- wide mode.

•In the DVD changer, when the monitor display size is set in the CINEMA and WIDE (PAL) modes, a part of playback display such as play time may not be shown depending on the play disc.

In this case, change the monitor display size to a mode other than the CINEMA and WIDE (PAL) modes.

Digital Radio/DAB

Operations

About DAB programmes

The Digital Audio Broadcasting (hereinafter referred to as “DAB”) system transmits several programmes on one frequency simultaneously, by compressing audio signals.

∗The group of programmes, which is transmitted on a single frequency is called “ensemble”.

∗Some DAB stations have several ensembles and broadcast diversified programmes.

∗The number of programmes and the contents which an ensemble provides depend on the broadcast stations and times. Since DAB programmes are broadcast on several different frequencies, the same programme can be enjoyed over large areas.

●A DAB station has multiple programmes on one frequency.

●When you turn the unit on and select DAB mode, the programme that starts is the one that was selected before when the power was turned off. If this programme is not available, another programme is selected automatically.

●Programmes have their own names, just like PS on RDS.

Note:

•For sophisticated audio quality, the receiver needs to tune on a DAB Ensemble. While the receiver is being tuned in to the DAB Ensemble, the Audio outputs are muted. The tuning time is not fixed.

Listening to the DAB

1.Press the FNC button 1 and select the DAB mode.

2.Press the right or left side of the SEARCH button 2 to tune in the desired station.

Tuning

There are 3 types of tuning mode available, seek tuning, manual tuning and preset tuning.

Seek tuning

1.Press the FNC button 1 to select DAB mode.

2.Press and hold right or left for 1 second or longer using the SEARCH button 2.

∗The unit stops the seek tuning when it cannot find a DAB station. The display returns to the previous mode.

32 VRX653R