Clarity Pal manual Call options, Tone button use during conversations, Auto DTMF, Auto response

Operations

•Short Press POWER ON/OFF key: ends the converstion.

•Use the UP/DOWN navigation key, or Volume UP/DOWN but- ton on left side of phone adjust the volume of the earpiece.

•Press the M1 memory key to access the menu and enter the call options.

Call options

Tone button use during conversations

Provides three (3) tone effects: Soprano, Bass, and Alto.

During conversations, switch these effects by pressing the TONE and BOOST (25dB) buttons on the right side of the phone.

The BOOST (25dB) button increases or recovers the volume.

You can enter call options during a con- verstaion — some functions can only be seen during a conversation.

Note: Other functions, such as call transfer, conference call, call holding, and call waiting require network sup- port. Refer to your network provider for details.

Call options functions:

•Hold single call: Pause one of the conversations during a multi-party call.

•End single call: End the current call.

•New call: After pausing of in-prog- ress calls, you can dial a new call.

•Phonebook: Enter the phonebook menu.

•Message: Enter the message menu.

•Sound recorder: Record the calling details.

•Mute/Resume: Open or close the mute mode.

•DTMF: Send DTMF signal.

Auto DTMF

Input a phone number with a “P”, and the phone will enter the DTMF mode automatically.

[letter P] + phone number = DTMF mode

Auto response

After inserting a headset, and setting the auto answer function, the phone will auto answer after two (2) seconds.

FUNCTION MENUS

Rolling searching functions

In idle mode, press the M1 (left) memory key to enter the menu.

During a conversation, press “options” to enter.

In all main or submenus, you can scroll to the function needed by using UP/ DOWN/LEFT/RIGHT key (using UP/DOWN key to turn pages), and then press the (left )M1 memory key to enter the function.

32