ClearOne comm AP800 operation manual Aamb, Amblvl, Explanation, Return Values, 39-40

Appendices ~ Appendix F: Serial Commands

AAMB

This command changes or reports back the state of the adaptive ambient for a microphone.

[DEVICE] AAMB <CH> <X>

41

AGC

This command changes or reports back the state of the AGC for a microphone or line input.

[DEVICE] AGC <CH> <X>

Explanation

<CH>

CH= 1-8 Parameter to apply to the specified microphone channel

CH= * Parameter to apply command to all microphone channels

<X>

X=0 Parameter to set the state to OFF

X=1 Parameter to set the state to ON

X=Null Parameter to return the current state

Return Values

The command will return the updated condition (On=1, Off=0) of the adaptive ambient in the same format as the command.

Explanation

<CH>

CH= 1-8 Parameter to apply to the specified mic channel

CH= A-D Parameter to apply to the specified line input

CH= * Parameter to apply command to all mic channels

<X>

X=0 Parameter to set the state to OFF

X=1 Parameter to set the state to ON

X=2 Parameter to toggle the state from one state to the other (regardless of current state)

X=Null Parameter to return the current state

For serial port command protocol and syntax, see pages	Return Values
39-40.
	The command will return the updated condition (On=1, Off=0)
	of the AGC in the same format as the command.

AMBLVL

This command changes or reports back the setting of the fixed ambient level for each AP800. This value is only used if adaptive ambient is not enabled.

[DEVICE] AMBLVL <X>

Explanation

<X>

X=0 to -70 Parameter to set the ambient level (in dB)

X=Null Parameter to return the ambient level

Return Values

The command will return the updated ambient level for the selected AP800 in the same format as the command.

Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760