ClearOne comm AP800 Flow, Explanation, Return Values, Appendices ~ Appendix F Serial Commands

44

FLOW

This command selects or reports whether hardware flow control is enabled or disabled for the AP800. Hardware flow control is implemented using RTS and CTS.

[DEVICE] FLOW <X>

Explanation

<X>

X=0 Sets flow control to OFF

X=1 Sets flow control to ON

X=Null Parameter to return the current mode

Return Values

The command will return the updated condition (On=1, Off=0) of the AP800 in the same format as the command.

Appendices ~ Appendix F: Serial Commands

FMP

This command selects or returns the status of the first microphone priority mode for the AP800.

[DEVICE] FMP <X>

Explanation

<X>

X=0 Parameter to select first microphone priority mode to OFF

X=1 Parameter to select first microphone priority mode to ON

X=Null Parameter to return the current mode

Return Values

The command will return the updated condition (On=1, Off=0) of first mic priority mode in the same format as the command.

FMP

This command selects or returns the current status of the first microphone priority mode for the AP800.

[DEVICE] FMP <X>

Explanation

<X>

X=0 Parameter to select first microphone priority mode to OFF

X=1 Parameter to select first microphone priority mode to ON

X=Null Parameter to return the current mode

Return Values

The command will return the updated condition (On=1, Off=0) of first mic priority mode in the same format as the command.

FPP

This command sets and reports the current passcode setting for the AP800.

[DEVICE] FPP <XXXXX>

Explanation

<XXXXX>

X=1	▲ button
X=2	ENTER button
X=3	ESC button
X=4	▼ button
X=5	METER button
X=6	INPUT button
X=7	SYSTEM button
X=8	OUTPUT button
X=9	ROUTING button
X=Null	Parameter to return current passcode

Return Values

The command returns the current or updated condition of the front panel passcode.

Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760