ClearOne comm AP800 operation manual Gmode, Gratio, Hold, Explanation, Return Values

46

GMODE

This command changes or reports back the gating mode for a microphone.

[DEVICE] GMODE <CH> <X>

Explanation

<CH>

CH= 1-8 Parameter to apply to the specified microphone channel

CH= * Parameter to apply command to all microphone channels

<X>

X=1 Parameter to set the state to AUTO

X=2 Parameter to set the state to MANUAL ON X=3 Parameter to set the state to MANUAL OFF X=4 Parameter to set the state to OVERRIDE ON X=5 Parameter to set the state to OVERRIDE OFF X=Null Parameter to return the current state

Return Values

The command will return the updated condition of the gating in the same format as the command.

GRATIO

This command changes or reports back the setting of the gate ratio.

[DEVICE] GRATIO <X>

Explanation

<X>

X=0-50 Parameter to set the Gate Ratio (in dB) X=Null Parameter to return the current gate ratio

Return Values

The command will return the updated gate ratio (0–50) in the same format as the command.

Appendices ~ Appendix F: Serial Commands

HOLD

This command changes or reports back the setting of the hold time.

[DEVICE] HOLD <X>

Explanation

<X>

X=100-8000 Parameter to set the hold time (in milliseconds)

X=Null Parameter to return the current hold time

Return Values

The command will return the updated hold time in the same format as the command.

LFP

This command locks, unlocks, or returns the current state of the front panel from the serial port.

[DEVICE] LFP <X>

Explanation

<X>

X=0 Parameter to unlock the front panel

X=1 Parameter to lock the front panel

X=2 Parameter to toggle the state from one state to the other (regardless of current state)

X=Null Parameter to return the current state of the front panel

Return Values

The command will return the updated condition of the front panel.

Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760