ClearOne comm AP800 Operation, Remote Control, Volume Control, To increase volume

CHAPTER 4: Operation

Control

When operating the AP800, there should be very little to do with the AP800 unit itself. You can make changes quickly with AP-Ware software, if necessary. If correctly installed and programmed, the AP800 system should not require any further interface other than perhaps controlling volume of a particular output, or muting an input or output.

Remote Control

ClearOne Communications recommends use of a custom remote controller for user interface. Refer to the manufacturer’s documentation for your particular custom remote controller. Basic control is also available with the ClearOne AP IR Remote.

All other functionality requiring direct interface with the equipment is contained in other parts of the Audio Perfect system, such as the AP10, or is handled through the serial port.

Volume Control

To increase volume

1.Determine which output (speaker, telephone, etc.) the input audio (microphones, CD player, etc.) is being routed to.

2.Press the Outputs, scroll to the Gain Adjust selection, then press Enter.

To decrease volume

1.Adjust the gain level with the s and t buttons. You should be able to hear the volume level adjust while increasing or decreasing the gain.

2.When the desired level is reached, press Enter.

Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760