ClearOne comm AP800 Master, Appendices ~ Appendix F Serial Commands, Explanation, Return Values

Appendices ~ Appendix F: Serial Commands

LMO

This command changes or reports back the setting of the last microphone on mode for each AP800.

[DEVICE] LMO <X>

Explanation

<X>

X=0 Parameter to set the mode to OFF

X=1 Parameter to set the mode to Microphone #1 X=2 Parameter to set the mode to Last Microphone On X=Null Parameter to return the current mode

Return Values

The command will return the updated mode for the selected AP800 in the same format as the command.

LVL

This command reports back the level for a given channel.

[DEVICE] LVL <CH> <W>

Explanation

<CH>

CH= 1-8 Parameter to apply to the specified channel CH= A-D Parameter to apply to the specified channel

<W>

W= I Parameter to specify an input meter W= O Parameter to specify an output meter W= A Parameter to specify an adaptive ambient meter

Return Values

The command will return the input level of the channel in the same format as the command.

47

MASTER

This command selects or returns the current mode of the AP800 from the serial port.

[DEVICE] MASTER <X>

Explanation

<X>

X=1 Parameter to designate the AP800 as master- single

X=2 Parameter to designate the AP800 as dual mixer X=3 Parameter to designate the AP800 as slave X=4 Parameter to designate the AP800 as master- linked

X=Null Parameter to return the current mode

Return Values

The command will return the updated condition of the mixer in the same format as the command.

Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760