Making a Call

Using the Handset

1.To make a call, lift the handset and listen for a dial tone.

2.You can dial a number manually or press one of the memory dial keys once programmed. If you make a mistake while entering a number, press the Clear soft key to delete it or hang up and begin again.

3.Adjust your volume and tone settings if needed.

4.When finished, hang up the handset.

Using the Speakerphone

1.Press the Speaker key on the base and listen for a dial tone.

2.Dial the number you want to call. If you make a mistake while entering a number, press the Clear soft key to delete it or hang up and begin again.

3.Adjust your volume by using the volume control VOLUME- or VOLUME+ located on right side of the phone.

4.When finished, press the Speaker key to hang up.

5.To change back from speakerphone to handset use, simply pick up the handset to disable the speakerphone. The icon will disappear from the LCD.

6.To change back from handset to speakerphone, simply press the Speaker key and then hang up the handset. The icon will appear on the LCD and the handset is disabled.

NOTE: You can also press and hold any memory key for two seconds and the speakerphone will turn on and automatically dial the programmed number.

Using Audio and Telephone Neckloop/Headset Jacks Your phone is equipped with both Audio and Telephone Headset jacks, providing total flexibility and multi- functionality. Both jacks are amplified, allowing you to adjust both the tone and volume. These jacks accommodate a variety of optional accessories including neckloops,

20 – ENGLISH

Page 20
Image 20
ClearSounds CSC600D manual Making a Call