Clarification:

If you want to shift the case between upper and lower, between entering letters, press the * key.

When entering the same letter twice or a different letter with same key, wait for a few seconds for the cursor to move automatically and then select the next letter.

Adding Phonebook Entries

Method 1: By using the Phonebook Menu

1.Press the PhoneBk soft key to enter the phonebook.

2.Press the Select soft key to choose (Add New Name).

3.The display shows “Name:”. Enter the name you want to use and then press the Save soft key to confirm. The display shows “Number:”. Enter the desired number (up to 24 digits) and then press the Save soft key.

4.The display shows “Record Voice”. Press the Yes soft key to confirm or the No soft key to cancel. If you press Yes, you can start to record the name of this entry (up to 6 seconds). You can also press the End soft key to confirm and end the recording. Your recording will immediately play back for your confirmation.

5.Repeat if necessary.

Note: If you make a mistake while entering a name or a number, use the Clear soft key to correct it. Each time you press this key, the last digit is deleted.

Note: If you record a voice prompt for an entry, an icon will appear before the name of the entry.

Method 2: In Standby Mode

1.Enter a phone number while in standby mode and then press the Store soft key.

2.Follow steps 3-5 as shown in Method 1.

37 – ENGLISH

Page 37
Image 37
ClearSounds CSC600D manual Clarification, Adding Phonebook Entries, Method 1 By using the Phonebook Menu