To install:
1.Make sure the AC adapter and phone line cord are disconnected.
2.Open the battery compartment door located on the underside of the phone by unscrewing the battery compartment door and removing it from the phone (screwdriver provided).
3.Correctly insert 4 AAA Alkaline batteries (purchased separately) in the battery compartment. Be sure to observe battery polarity as imprinted.
4.Replace the battery compartment door and screw it back in place.
Desk / Table Mounting
1.Connect one end of the 6 ft phone cord to the line jack on the back of the base and connect the other end
to a modular phone jack.
2.Plug the AC power adapter into the
jack on the back of the base, then plug the AC adapter into a standard electrical outlet or surge protector.
NOTE: The adapter is required for the phone to work.
Wall Mounting | Desk tab | Wall mount |
1. Slide the handset hanger tab | position | tab position |
out and reverse its position |
|
|
(rotate it 180 degrees). Slide |
|
|
it back into place so that the |
|
|
hook points up (see Diagram 6). |
|
|
This will keep the handset |
|
|
from falling out of the cradle |
|
|
|
| |
when it is mounted on the wall. | Diagram 6 | |
2.Plug the AC power adapter into
the jack on the back of the telephone. Wait until the phone is completely setup before plugging the AC adapter into the electrical outlet or surge protector. NOTE: The adapter is required for the telephone to work correctly.
