on the right side of the phone to increase or decrease the volume while the phone is ringing.
Note: If you set the volume to “OFF”, when a call comes in, only the New Call information appears on the LCD and the phone will not ring.
Other Ringer Alert Options: Strobe & Shaker / Only Shaker
/Only Strobe (located on the rear of the base)
Your telephone incorporates several options to alert you that the phone is ringing. The loud, adjustable ringer as well as the bright strobe and optional bed shaker or any combination of these allows you to customize the phone to fit your needs.
Your phone is equipped with a bright strobe light that can flash a very bright strobe when the phone rings. If you have selected the strobe to be ON, it will flash on all volume levels.
Your phone is equipped with a 3.5mm vibrating alert jack for an optional bed shaker (purchased separately) to alert you when the phone is ringing. Simply plug it into the shaker jack and place it between your mattress and box spring or under the cushion of a chair. When the phone rings, the pad will vibrate with each ring of the phone.
NOTE: Your ClearSounds® CSC600D comes from the factory preset to both Strobe & Shaker ON position. If you would like to override the factory preset, simply change the selection on the rear of the phone.
█Using your Visual Indicator
The red flashing visual indicator on the base will flash to alert you to new calls received or if you have a voice mail message waiting from your service provider. To turn this feature OFF, see page 32.
█Using your Phone with Hearing Aids and
Cochlear Implants
Your phone can be used with hearing aids and cochlear implants equipped with a telecoil
