headphones, earbuds, silhouettes, cellular accessories and cochlear patchcords* (not included).
*Caution: Before plugging any cord into your cochlear implant processor, you should consult your implant manufacturer.
The Audio Neckloop/Headset Jack - the 3.5mm Audio Neckloop/Headset jack allows you to listen through your device while speaking into the handset or speakerphone. This jack is located on the rear side of the base.
Telephone Headset Jack - the 2.5mm telephone jack can accommodate many
1.Plug your neckloop, headphones, headset or other accessory into the Audio jack or Telephone headset jack.
2.If you are using the 3.5mm Audio jack and want to speak into the handset, lift the handset, listen for dial tone and dial the number. Speak into the handset and adjust your volume. To end the call, replace the handset to the base.
3.If you are using the 3.5mm Audio jack and want to speak into the speakerphone, press the Speaker key, listen for dial tone and dial the number. Speak into speakerphone (the conversation will be heard through both your audio equipment and over the speakerphone) and adjust your volume. To end the call, press the Speaker key again on the base.
4.If you are using the 2.5mm Telephone headset jack for total
in the cradle. Press the Headset 
key, listen for dial tone and dial the number. Talk into the headset microphone and adjust your volume. To end the call,
press the Headset 
key.
