Clevo D900F Disassembly, Upgrading a Third System Memory RAM Module, Third RAM Module Removal

2.Disassembly

Disassembly

Figure 8

Third RAM

Module Removal

a. Press the four latch- es to release the keyboard.

b. Lift the keyboard up. c. Remove the screws and keyboard plate.



RAM Module Speeds

Use either 1066MHz OR 1333MHz DDRIII (DDR3) modules of the same brand. Do not mix DRAM speeds/brands in order to prevent un- expected system be- havior.



8. Keyboard Plate

• 2 Screws

Upgrading a Third System Memory (RAM) Module

If you wish to add a third memory module follow the procedure below (note the sidebar warning on RAM speeds).

1.Turn off the computer, and turn it over and remove the battery.

2.Turn the computer back over to access the keyboard.

3.Press the four keyboard latches 1 - 4 at the top of the keyboard to elevate the keyboard from its normal position (you may need to use a small screwdriver or pair of tweezers to do this).

a.

1 2 3 4

4.Lift the keyboard up, but be careful not to twist the keyboard ribbon cable 5 .

5.Remove screws 6 - 7 and remove the keyboard plate 8 .

b.c.

6 7

5

8

2 - 12 Removing the System Memory (RAM)