Clevo D900F manual Disassembly, Removing the System Memory RAM 2

Models: D900F

1 102
Download 102 pages 22.79 Kb
Page 37
Image 37
Manual background

6.Gently pull the two release latches ( 9 - 10 ) on the sides of the memory socket in the direction indicated by the arrows in Figure 9

7.The RAM module 11 will pop-up, and you can remove it.

d.e. 9

11

10

8.Pull the latches to release the second module if necessary.

9.Insert a new module holding it at about a 30° angle and fit the connectors firmly into the memory socket.

10.The module’s pin alignment will allow it to only fit one way. Make sure the module is seated as far into the socket as it will go. DO NOT FORCE the module; it should fit without much pressure.

11.Press the module in and down towards the mainboard until the socket levers click into place to secure the module.

12.Replace the keyboard plate, screws and keyboard.

13.Restart the computer to allow the BIOS will register the new memory configuration as it starts up.

Disassembly

Figure 9

Third RAM Module Removal (cont’d.)

d. Pull the

release

latch(es).

 

e. Remove

the mod-

ule(s).

 



Contact Warning

Be careful not to touch the metal pins on the RAM module’s connect- ing edge. Even the cleanest hands have oils which can attract particles, and degrade the module’s perfor- mance.

2.Disassembly



28. RAM Module

Removing the System Memory (RAM) 2 - 13

Page 37
Image 37
Clevo D900F manual Disassembly, Removing the System Memory RAM 2