Compaq 1245 To replace the processor complete the following steps:

Compaq.com - Compaq Presario 1200 Series Maintenance and Service Guide - Model 1245
United States December 9, 2002
Maintenance & Service Guide
Presario 1200 Series
Model: 1245
| Home Page | Notice | Preface | Product Description | Troubleshooting
Illustrated Parts Catalog | Removal & Replacement Procedures | Specifications
Pin Assignments | Battery Pack Operations
To replace the processor complete the following
steps:
1. Insert the processor into the slot on the system board.
NOTE:The notch on the left corner of the processor serves as an orientation
indicator. Align the notch on the left corner of the processor with the notch
on the left corner of the processor chassis slot.
NOTE:
When installing the processor into the chassis slot, be sure
that the hole pattern on the chassis slot lines up with the
pins on the processor. The processor should drop into the
socket without any force.
2. Insert a small blade screw driver into the top slot opening on the
processor and push it away from the display to lock the processor.
3. Verify the switch settings.
Return to Removal & Replacement Procedures
privacy and legal statement
http://h18000.www1.hp.com/athome/support/msgs/1245/locking.html [12/9/2002 9:12:55 AM]