![](/images/new-backgrounds/1120456/120456173x1.webp)
Maintenance & Service Guide
Presario 1200 Series
Model: 1245
Home Page Notice Preface Product Description Troubleshooting Illustrated Parts Catalog Removal & Replacement Procedures Specifications Pin Assignments Battery Pack Operations
Preliminary Steps
Before running POST, complete the following preliminary steps:
1.If a
2.Run Computer Checkup.
3.Turn off the computer and its external devices.
4.Disconnect any external devices that you do not want to test. Do not disconnect the printer if you want to test it or use it to log error messages.
If the problem only occurs when an external device is connected to the computer, the IMPORTANT: problem may be related to the external device or its cable. Verify this by running POST
with and without the external device connected.
5.Install loopback plugs in the serial and parallel connectors if you would like to test these ports.
6.Ensure that the hard drive is installed in the computer.
7.Ensure that the battery pack is inserted in the computer and the computer is connected
to an external AC power source.
When these preliminary steps are completed, you are ready to run POST.
Return to Troubleshooting index page.